Basit Jamil

MrPLC Member
 View profile  See their activity

  • Content count

    8

  • Joined

  • Last visited

Posts posted by Basit Jamil

  1. Posted

    Hi everyone... I'm not a AB expert.. I'm using L74 controller, Rm2 redenduncy module,  EN2TR and EN2T module (on each chassis) on my control logix project and having 3 remote IO's rack on ring topology... I have use EN2TR for ring topology and EN2T for scada communication. The problem is my controllers are not synchronising on fibre optics... I have to connect both EN2T modules with one an other for controller's synchronisation. They are syncing over ethernet but not over optical... your help is appreciated 

     

    Thanks in advance

  2. Posted

    No i did not connect mitsubishi.

    Previously i just changed my power supply from q61p-A2 to Q64p because there was an error on the PLC error code is 1403 unsupported module is mounted.to resolve this error i replaced my power supply on main chashis with q64p. after replacing the power supply the error 1403 did not occur again but this happened that all my analog inputs modules channel values hold its last value after random time like after 12 hrs or 18 hours.and after power off the plc supply it works normally.

  3. Posted

    The values on the BFM hold its values.

    X and Y of Analog Input Module is as follows.

    Module Ready X is ON

    Temperature Drift Compensation Flag X is OFF

    High Resolution mode status flag X is OFF

    Operating condition setting completed flag X is ON

    OFFSET/Gain setting Mode Flag X is OFF

    Channel Change Completed flag X is OFF

    Maximum value / Minimum Value reset completed flag X is OFF

    A/D Conversion Completed Flag X is ON

    Error Flag X is OFF

    Operating Condition setting request Flag Y is OFF

    User Range Write Request  Y Is OFF

    Channel Change Request Y is OFF

    Maximum Value / Minimum Value  Reset Request Y is OFF

    Error Clear Request Y is OFF

     

     

  6. Posted

    Hi, I am facing the strange problem with QCPU (Q03UDE) Controller, I have multiple modules in my project ( Analog, Modbus & Digital Modules) but after some time a random error comes and all my analog Chanel values hold the last values, meanwhile controller does not show any error in the diagnostic tool. After rebooting the PLC power Chanel values start to update. This thing happens randomly. 

    Kindly help me. 

    Thanks in advance

  7. Posted

    Yeah you are right system is very old... The client  does not want to spend much. Is there any way to write program that stay in cpu after shut down? 

  8. Posted

    I'm new with Mitsubishi a series cpu... I'm having a problem I just need to know how to write on eprom. Kindly do let me know the exact switch which I need to turn on or off... 

     

    Thanks in advance