Bo_Vice
MrPLC Member-
Content count
6 -
Joined
-
Last visited
Posts posted by Bo_Vice
-
-
OK,
So I've tried power cycling the rack and still no luck. Any other ideas would be welcomed!
-
thanks Joe, I will give that a try.
-
Hi Joe,
Yes I've tried this as well. When I do this from RSLinx I get the message "A newer version of the device is already registered on your system". I have rebooted my laptop, however I have not tried to power cycle the rack, though I'm not certain this would accomplish anything.
-
Hi Michael,
Sorry, Yes i also used the EDS installation tool and installed them.
-
Hi guys,
We recently had the hard drive fail on our PLC laptop. Once out IT guy loaded all of our data on the new HDD I went to work re hosting our activations and enabling them on the new HDD. An issue has come up where on one particular device, I am unable to see the 1756-A17/B backplane beyond the 1756-ENBT module in RSLinx calssic gateway. After i configure the driver, I am able to see that there is a 1756-ENBT module, and it even has the (+) to drop down the hierarchy, but the backplane never shows. Strange thing is, I have another machine on a 1756-EN2T module and i can explore the backplane with no issues at all. We had no connectivity issues before the hard drive crashed. I have everything else communicating.
I've scoured the forums and knowledge base and have tried everything that has been mentioned to fix this:
- downloaded all the EDS I could find pertaining to said cards/modules/backplane
- deleted the harmony files
Like I said, I can "see" there is a ENBT module, it knows what kind of module it is, there is no yellow question mark or red "x" just for whatever reason when i hit the drop down button the backplane isnt being found.
A push in the right direction would be muchly appreciated.
Can't browse beyond 1756-ENBT in rslinx classic gateway
in Allen Bradley / Rockwell Automation
Posted · Edited by Bo_Vice
Hi Joe,
A huge thank you good sir, problem has been resolved!!
So the first thing I did was try removing the EDS files, re-downloading and re-installing them as you suggested. This didn't have any effect and i was still unable to see the anything beyond the ENBT module.
I tried the next step you suggested and went to the link
https://rockwellautomation.custhelp.com/app/answers/detail/a_id/57829
I followed all the instructions on this and it worked without a hitch, I'm now able to explore the backplane and see all modules on the rack
I was smashing my head on my keyboard for the last 2 days, I cant thank you enough Joe!