Ojay
MrPLC Member-
Content count
15 -
Joined
-
Last visited
Posts posted by Ojay
-
-
existing project and i have checked the comments for the NO message but cannot find it. Please tell more about the extended settings
-
I would want that the pop up alarm is not showing when there is no alarm or error message. I am using GT 21 and the pop up alarm is there and displays NO message all the time.
How can i disable it when there is no error or alram message?
-
is the settings for the file save configured properly?
with softGOT2000,it is always advisable to open the project afresh when you restart
-
someone please help to answer this question
-
Thank you.....actually did not get the right direction....quite a newbie...
Attching a screen or explainng more will help. I do not mind waiting.
-
I have several motor devices and would like to use just one window screen; to pop up when the switch near the motor device is clicked ...for on,off and stop.
is it possible to use just one window screen for all these motor devices about 10 of them on the same base screen?how? -
15 hours ago, nehpets said:I think you are getting confused with the preview function, this is not a simulation only a graphical overview of your screen.
That said, you can click on the panel meter graphic and modify the displayed value, but it will not dynamically follow your numeric input.
To have it dynamically change the panel meter graphic in line with your numeric input you need to simulate it, which if installed will be accessable under the 'tools' dropdown.
Steve
Absolutely right. Thanks for the clarification.
-
1 hour ago, collinsd70 said:Hi Ojay.
Im assuming you mean you want to display the numerical value onto a HMI?
You will need to find out where the numericla display is written from then copy the device address to your graphic display
Regards
Daniel
how can i do this?...please explain further
-
i preview and test my design on the preview window. I have a numerical display tool and a graphic bar.... I want that when the value on the numerical display changes the fill on the graphic meter should respond accordingly...... the graphic meter should read data from the numerical display......and fill accordingly... i still cannot figure it out
-
I create a graphic meter and i want it to read data from the numerical display..how can i do this?
-
Thanks a lot Steve.That worked......
-
-
Thanks....
-
I created a template and have saved it in my library. it is an object. if i change for example an attribute say colour on the library editor...it does not change in the main screen editor. I have a number of the objects used in my main screen ( template(1)template (2)........) ......I would want if I change the template in my library that others templates in main screen changes accordingly too...someone please help!
Pop Alarm display
in Mitsubishi
Posted
Thanks for the reply....i critically checked the alarm files and see that no comment was entered for some error. Perhaps the bit is ON and the HMI just displays "No message".
I will investigate further from the GX works.