Raubba
MrPLC Member-
Content count
4 -
Joined
-
Last visited
Posts posted by Raubba
-
-
Thank you,
is it possible to change one of my input-modules from the backplane with the C200H-LK201 to take a backup and after doing that i change it again?
Or is it not possible to upload/download the program when there is one module missing which is used by the program?
-
Thanks a lot Jay Anthony.
But this means that I can change the raw PLC and use it witch the same Memory Unit if the PLC 1 is damaged?
Do you know what kind of Software I need? Is CX-One Ver. 4 right? Is it right that I need a Host Link for connecting the PLC to my Computer?
-
Hello,
first of all sorry for my english skills. I've got two questions about a 20years old PLC from Omron (C200H CPU23).
This PLC is still working in one of my machines and I have also a second one for the worst case scenario....
Now my Questions:
- If i take the Memory Unit (EEPROM) from the PLC 1 and connect it to the PLC 2 is my machine still running ? Did the PLC copy the programm automaticly from ROM to RAM and
everything is fine?
- I also need a backup of the Memory Unit (c200h-me831). What are my options? Did I need a programming cable, Software (CX-One?) to make a Backup of the Program to a second Memory Unit?
I hope there is someone who worked with this kind of PLC.
Thanks a lot for helping me
Greets Andy
C200H CPU23 MemoryUnit Backup
in Omron
Posted
Theres another question...
Can i use in any case the "Syswin" Software to take a backup or just in the case the PLC was programmed with Syswin?
If the Eprom of the PLC is programmed with CX-Programmer then I need CX-Programmer for the Backup?