vanquangtk

Hello Do anyone know where is home input signal on Omron Servo motor. Have a great day

Hi, Can anyone help me with MC-Home Instruction. I want to use No Home Proximity Input/Holding Home Input Operation with a sensor to detect home postion. But I don't know how I connect this sensor with home input signal. And do I must use  negative/positive limit input signal too. Thank you

Hello, Thank you every one for your help. I already fixed that problem by following steps in this link https://www.myomron.com/index.php?article=1607&action=kb

Hello every one  I got a trouble with Omron Sysmac,when connecting with NX-ECC201.My NX-ECC201 include 2 module NX-ID and 2 module NX-OD. I got the error "Slave Application Error" with it Do you know how I can solve this error. Thank you so much

Thank you so much for help me, I will try to find exact code error I got tommorow when I work back. It seem that I made the servo move too fast in a short distance

Sorry do I must take MC-Reset or MC-Reset Error, I got this error so often , may you tell me the way to prevent it. Thank you

I did them all, but it didn't word Do I need to take MC-Reset before Reset ECError

I got a trouble with drive servo, it alarm overload error with error code is 034E200. I tried to reset that error by functions: Reset MC-Error or Reset-PLC Error. But I failed, the only way I can do to make it disappear is using reset button in troubleshooting tab of Sysmac Studio. Can anyone tell me the reason of it and how I can fix it completely, thank you

Thank you so much, I got it now

Hello everyone. I have  a problem when programing for a machine system with NJ by Sysmac studio. When I need to restart the system, I need to reset some variable in the program. Before, in Mitsubishi PLC, I just need to use ZRST to reset all variable I want in once time. But I can't find any function like that in Sysmac. I must reset every variable one by one. This is so annoying and boring too, Does any one know how to solve my problem. Thank you so much.

I'm sorry but I don't understand what you mean. May you give ma an example, thank you

But that variable only reset when the power off and turn on again. The thing I want is I just need do press a button and all variables will be reset

Can I use the bit  AxisName.Status.Ready for it

Does any one know how I can be sure that my servo stopped completely after a move instruction

Oh, I see it now. Thank you so much for helping me.With help of you and people here , I start know how to control servo through NJ

I am sorry for this. I intended to post it in a new thread. But I have many stuff small question like that about omron, NJ and FH. And I think it woul be better and convienient to post all of them in one thread

Hi guys, is there anyone here know how to create and read data output from FH sensor in Sysmac. I read the manual of omron but they are so complicated for me. Maybe I need an example for that. Do anyone have experience in it? Thank you.

I also get another similiar problem, but this time with MC-Homing, error said , two limit signal are on, how can I resolve the problem

Can you tell me the use of these parameter, I'm just begginer with NJ so I really don't understand these parameter at all. Are they similar to internal relay of Mitsubishi PLC

I connect the servo with NJ through Ethercat, so I don't know where I should find the switch/sensor, actually I don't install any sensor with servo . Where should I alter the input parameters in Sysmac