kraykov
MrPLC Member-
Content count
89 -
Joined
-
Last visited
Posts posted by kraykov
-
-
Hi FranzPLC,
Module FX2N-EX of digital inputs and added to the main unit to the controller. No need to be defined in GX developer.Suffice program is compiled and loaded into the controller.
-
Hi Nuwan,
This cable is not possible. In FX controllers MITSUBISHI using RS422. Upon Twido used RS485.
If you have USB-RS485 converter scheme of colleague ACPI easily you can make cable.
-
1. Learning about connecting the input terminals of the inverter - STF, STR, PC or SD
2. Use Does analog inputs - 4 and 5 OR 2 and 5
3. Then define the parameter settings related to input signalsUsually washing a movement forward, backward with low speed and centrifuge at high speed.
-
In GX Works3 v.1.020W these bugs are gone.
-
Typically uses port 5001. Check allows this port.
-
Hello colleague,
SP for PID can be set from the control panel or external analog input. With a value of the control panel is used Pr.133. We tune Pr. 79 - 3.
Also be used and parameters Pr.128 - Pr.134 and Pr.575, Pr.576.
Start of PID can use terminal RH set to 14 (Pr.182) or automatic switchover frequency Pr.127.
Good luck.
PID controller
in Mitsubishi
Posted
The new inverter FR-A840 has a built-in PLC so that training can start it. It is possible to use the built-in PID in the inverter and there is no need PLC for example inverter FR-D700, FR-E700 and FR-F700 MITSUBISHI.