[Modbus TCP/IP Communication Stop]

I work with Modbus TCP/IP Communication on CPU S7-1200.
I've configured MB_Server block V3.1, but after 15 min it stops. 
In MB_Server_DB , Static - Request_Count and Server_Message_Count stop to go up, and Connected stays TRUE.
After I STOP and then START the CPU, Request_Count and Server_Message_Count, and Connected are reset. And again it stops after 15 min.

Any ideas?

CPU - CPU 1214C DC/DC/DC.
Firmware - V4.0.

Thank you,
Olesia

[PID Software - real time tuning]

Hello all,

I was asked to check if there is a PID real - time software which automatically calculates PID loops parameters and update the PLC registers or HMI ( by OPC server etc.) when the process is working and "breathing". REAL-TIME.

Not PID simulator or PID tuner based on measured data,
but a software that will calculate and update the PID parameters in real time while maintaning several PID loops simultaneously.

Are there any suggestions?

Thank you,
Olesia

[FT 7 Studio -"Cannot connect to addin object Name: Application Handler Cause: 80004005"]

I talked to Rockwell Automation tech. support (in my country) and yes, FTV is not supported bu Windows 10.

 

I asked to check when it will be supported

[FT 7 Studio -"Cannot connect to addin object Name: Application Handler Cause: 80004005"]

Hi Mikey431, 

Recently I have upgraded OS to Windows10.

And the last time it worked was on the same PC but it still was Windows8.

Yeah,tried to restart... same pop-up appeared and FT didn't work...

 

 

[FT 7 Studio -"Cannot connect to addin object Name: Application Handler Cause: 80004005"]

Hello dear all.

I have FT 7 View on my PC. 

When I open FT 7 Studio I get the following pop-up:
"Cannot connect to addin object Name: Application Handler Cause: 80004005"

And of course FT 7 Studio does not working  

Ideas?

Regards,
Olesia.