Sohaib
MrPLC Member-
Content count
4 -
Joined
-
Last visited
Posts posted by Sohaib
-
-
Dear Members: I am new in Beckhoff Twincat system. I am working on a project. I am using CX9020 as my embedded PC. I have connected EL5101 as incremental encoder interface with CX9020. I was able to find EL5101 in my system manager. The operation mode is Free Run/SM-Synchron and EL5101 is in OP mode. The power and the run LED is green. I have also configured the NC-configurations. I have Append Axis and then selected Encoder Axis in the types. In my Axis_Enc I have linked NC-Encoder with EL5101. Now the EL5101 ENC Status compact inputs and ENC Control compact outputs are now linked to variables in the Axis_Enc in the NC-Cofigurations. Now I don’t know what to do next. I have not connected Heidenhain incremental encoder ERN 460 with my EL5101. I have 3 different input terminals A A’,BB’,CC’ and also Latch 24V and Gate 24V in my EL5101. The incremental encoder also have 3 types of output wires AA’,BB’,CC’. Also the incremental signal of my ERN 460 is 5V TTL. I want to know do I need to connect all the output wires of encoder AA’ BB’ CC’ to their corresponding terminal in the EL5101? What about Latch 24V and Gate 24V? What I have to do with these terminals? Is there any sample program or any step by step guide that how can I measure rpm through this setup? What kind of variables and data type I have to define in my PLC Control and to which physical input and outputs I have to link them? Is there any high speed counter in Twincat PLC Control? Please reply. Thanks. -
Dear Members: I am new to Twincat System. I am working on a project. I have connected CX9020 with my laptop through ethernet cable. I was able to find CX9020 through broadcast search and I was successful in connecting it. I also found my Inputs through scan devices. The TC LED light on my CX9020 was blue then and I was in config mode.But when I clicked Activate configuration my CX9020 was not connected with Twincat and there was a cross on CX9020. The LED light on CX9020 is green now. There is also written Timeout in the software. I am unable to find CX9020 in broadcast search. Now I cant get my system in the normal mode. Also the yellow Timeout is not going. Everytime I start my system and try to get connect with CX9020 Timeout appears. Please tell me How can I remove this Timeout status. -
Dear Members: I am new to Twincat System. I am working on a project. I have connected CX9020 with my laptop through ethernet cable. I was able to find CX9020 through broadcast search and I was successful in connecting it. I also found my Inputs through scan devices. The TC LED light on my CX9020 was blue then and I was in config mode.But when I clicked Activate configuration my CX9020 was not connected with Twincat and there was a cross on CX9020. The LED light on CX9020 is green now. There is also written Timeout in the software. I am unable to find CX9020 in broadcast search. Now I cant get my system in the normal mode. Also the yellow Timeout is not going. Everytime I start my system and try to get connect with CX9020 Timeout appears. Please tell me How can I remove this Timeout status.
Canopen SDO’s configuration and Variable mapping of the parameters in TwinCat
in Other PLCs
Posted