cgjJounior

Greetings In a WinCC V7.0 HMI project which is supposed to monitor the Schneider Premium with two TSX ETY 110ws ethernet modules, WinCC must the tags from both ethernet modules simultaneously for redundancy purpose. The protocol is Modbus TCP/IP and there are two network adapters in the OS, each one connecting to one ETY110ws module, so each one has a drive in WinCC. This Redundancy is Possible? if so, How?

Hi. Schneider control system with TSX P57304M with a TSX PBY 100 profibus module with 467NHP81100 PCMCIA Card is regarded to communicate with 5 ABB ACS800 drive. All ABB drives have FPBA-01 profibus module. However creating configuration by Sycon is not possible since the configuration software is basic. Can every body configure this communication and share the .CNF file. I sincerely appreciate any help. Regards.

Hi. Regarding working with a control system TSX P57 304M and two ETY110ws ethernet modules, none of the Ethway and XIP communications which ETY110ws is considered capable of handling communication via, are possible. Settings are done as per respective manuals. For XIP, respective driver is installed and settings are done but no way to set Ethway settings in Unity Pro XL V4.0. Programming is still being done via Unitelway.