-
Content count
38 -
Joined
-
Last visited
Posts posted by Parag Gajera
-
-
Here i have LOGO 24, i am facing problem that when ever ii am gonna make communication with software to LOGO, symbol for connection not enable at that moment. what will be the reason for this, and what will be solution for that. Thanx -
Here I have DVP 60 ES series PLC and I have hand made communication cable for programming, but problem is that PLC and software WPL soft not communicating with each other. I have also checked Continuity and Pin configuration and Communication settings but still not getting result. Provide me solution for this problem Thanx -
Hii, friends. I want to learn Servo Drive and Motor Deeply, starting with basic. I don't know anything about servo. So please guide me on these. If possible then send me tutorial or videos. Thanx. -
On ML1200 i have hand make cable for communication, PC to AIC+ converter and then AIC+ to PLC, Both cable i have made. I have also check continuity in both cable. It was working before 6 month ago without AIC+ converter, but suddenly stop working and still as it is. so i want to again make it on working condition. -
I have tried that, but still its not connecting..When i have pressed that tiny button one DCOMM indication activated...i have tried both way without indication and with indication..but no response for communication.. -
Hii, I have TWDLCDA40DRF schneider make PLC, which was working on 24vdc, but now whenever i have connect this PLC with power supply, its not getting on. So what would be the problem?, and please give me solution for that. -
Hii, I have TWDLCDA40DRF schneider make PLC, which was working on 24vdc, but now whenever i have connect this PLC with power supply, its not getting on. So what would be the problem?, and please give me solution for that. -
Is there any option for reset whole PLC without connection to software for Micrologix 1000 and Micrologix 1200.?? -
No, I am using RS 232 DF1 Devices Protocol for it. This was working properly on this protocol one year ago, and then i have shift its location, and after that its not working. I want to only work on RS 232 for connect RS Logix 500 with it. I have not any other option. Please give me solution for RS Logix 500 to Micrologix 100 communication via RS Linx. -
I don't have cable number but i have bought it from Jia Chang. Cable color is white, and connectors are 8 mini din to DB 9 serial. -
Hii, I have Micrologix 1000 and i want to connect my hardware with RS LOGIX 500, so for that i have buy new communication cable related to RS 232 protocol, but problem is that when ever i have configure driver in RS linx its shows error in RS 232 DF1 Devices. I have tried that PLC through AIC+ converter in that condition its working properly, but when ever i tried on other cables its not working. i have also checked all cable pin configuration and connections.
XBT OT 2110 Unlock method requiered
in Modicon / Telemecanique / Schneider Electric
Posted