-
Content count
14 -
Joined
-
Last visited
Posts posted by curbat
-
-
Privet, In WinNt is not present tab "compatibility" in properties. I start Modsoft through driver Virtual MBX. Problem where that in it. -
How to force Modsoft to work under WinNT 4.0? Interface ModbusPlus. Card SA-85. Tell it probably. I use driver MBX. Intouch works, Modsoft is not present. " Invalid NetBios command Modbus Error code 803". -
Hey all. The help is necessary to me. How to connect with Magelis-XBT-F HMI. I have xbt-z915 cable and XBT L1000 soft. Still is VijeoDisigner. My purpose to keep the project from HMI in VijeoDisigner. At attempt to make import from XBT L1000 there is an error. Kein terminal geschlossen. The equipment German. Any ideas? -
Hello. I have a question. What equipment is necessary for the remote control of a network modbus plus? The remote control for plc modicon 984 is necessary. -
I made backup mp370 and get error "cannot back up the flash file system".Why? -
I have PLC CJ1M CPU23.ADDL not support. -
I looking for a sequential start sequence.I have cx-programmer. -
The account of an operating time of each compressor and functional mode one behind another (on a circle) Excuse my English -
Prompt please instructions which it is possible to apply to operation of 5 compressors Exhaustive search, time of an operating time of each compressor. -
That is to say,I cannot see change A270-A271 or A272-A273 for HSC into cx-simulator.Is it possible to simulate functioning HSC?I right understund. -
One more question.I can try instruction CTBL and PRV into cx-simulator? -
I have cx-simulator v1,5.Is it possible? -
I can this example into cx-simulator run? Excuse my english.New.cxp
Modsoft under WindowsNT 4.0
in Modicon / Telemecanique / Schneider Electric
Posted