pszczepan
MrPLC Member-
Content count
438 -
Joined
-
Last visited
Posts posted by pszczepan
-
-
Hi I wanted to setup ETN Unit as it is in manual W441-E1-03, but my unit version is 4.0 and it looks different then in manual for v.3.0 In I/O table I do not have ETHERNET UNIT asyou see below Do you have any experience with Unit v.4.0? -
I have CJ1W-CTS21-E in Slot no. 0 and I want to add this module in IOtable, but I cannot find such a module I use CX-P 9.32 Hmm -
Another step I decided to use Wireshark to see what NSJ send via ETN using CMND command What I noticed in FINS command - blue data I send in network 1 data to IP 100 (#64) with unit 00 - it is OK The problem is with Network Source Address - 00 should be #1 and Source Node Address - SA1 - should be 220 (#DC), but it is 00 So that's probably CP1L doesn't reply to CMND command - simply it does not know where should send data. I have no idea why FINS header is wrong I cannot find any place to set it Any ideas? -
Some progress, but not yet success The unit must be as I wrote. 01 is wrong. Omron Engineer send me part of manual and there is info: Node address - For ETN Units with model numbers ending in ETN21: 01 - FE HEX - For ETN Units with other numbers: 01 - 7E HEX He suggested that NSJ can have ETN with other numbers and can service just node to #7E. My CP1L had #DB. I changed CP1L IP to 172.16.20.1 with node 1 and I set direct connection in CX designer to node 1 It started working I got on NS panel value from CP1L. The only problem is that if the screen with CP1L value is set on very often I get laud squeal and connection Error. For a screen I changed screen property/ Comm.details/ smart active parts communication to long, but still I got error during communication. Can I fix that? After that I started with PLC now I set CMND instruction to read word from D187 in CP1L in node 1. But I got response # 0101 2108. Do you know what does it mean - In manual W342 - communication commands - there is no error table. Thanks -
I can do this changes, but I am not sure if it is incorrect. In manual W452 I found: -
I changed routing table for CP1L - Network 1 is connected to 253 was 252 . I have CIF41 in port 1 I tried connect NSJ panel to CP1L but still the same - laud squeal. I changed also word C+4 from #1002 to #0002 but after execution error flag A219.00 is 1 (error) I attached config files (ZIP file) for CP1L ( PLC and routing) NSJ (argip files for CX Integrator ). setup for CP1W-CIF41 I attached below - I do not know how to save settings to file: IP router table is empty IP Address table has values for VPN connection. IP I have no idea what is wrong thanks for time Pawel CP1L_ETN.zip -
I added CP1L as below and I prepare 1 numeral display for D187 from CP1L to test connection. During downloading new project I got error and NS make loud squeal So I downloaded previous application without CP1L declaration and no noise and no error . Any other settings? Why word #3 should be #E800. If you mean C+2 word - it is defined: bit 00-07 - Destination unit address - maybe #00 bit 08-15 - destination node address - 219 = #DB - you wrote E8 IP is 172.16.20.219 node 219 I got reply from multiway. Maybe it gives any clue. I have some VPN to connect to this LAN. I could get some specs from IT to start another user thanks Pawel1 person likes this -
Does anybody configured CP1L and CP1W-CIF41 to work with SEND. I did what LOSTCONTROL wrote and nothing. 1. I couldn't set routing table via ETN. CX-P can get access, but not CX-NET or CX-Integrator. 2. I connected via USB and I set routing table as below in NSJ ETN is also 1 My NSJ IP is 172.16.20.220 CP1L 172.16.20.219 I am not sure if PORT1 is 252 or 253 - I tested with both option but result was the same - no SEND From Omron support I got info: - CIF41 can only reply to FINS command. So I wrote SEND code for NSJ I changed also mask for NSJ 255.255.255.0 as Omron support suggested Using SEND I want to transfer value from NSJ - D3000 ( &234) to CP1L - D187 but still I have &0 Where is the problem? -
I read manual carefully and the routing table should be set from CX-Integrator. So - I would be appreciate your test LOSTCONTOL. Please check if you can be online with CP1H in CX-NET via EThernet. If you set CP1H as a ethernet node I do not have CP1W-CIF41 to choose. How do you configure routing table for CP1H with CP1W-CIF41. For CP1L I do not have even any choice. I have CX-Integrator ver 2.37 thanks in advance -
With NSJ I can be online via ethernet in Cx-Net When I try to be online with CP1L with the same settings which I use in CX-PRogrammer for CP1L (then I am online) in CX-Net all the time I have connection failed. Does it mean that to set routing table for CP1L I have to connect via USB - ethernet is not accepted. In Cx-Integrator I cannot even add CP1L Maybe I have to set routing table for CP1L from Web browser? - hmm -
After my configuration I have access to both PLC via ETHERNET from CX Programmer. NSJ has a IP 172.16.20.220 CP1L 172.16.20.219 What routing table I should have in CP1L - there are some option but I do not have any example how to set. Pawel -
I tried SEND some words from NSJ to CP1L with no success also Otherwise SEND from CP1L to NSJ should work and I do not understand why it is complicating - hm? -
Hi! I want to send for test one word from CP1L to NSJ. My setup: CP1L - CIF41 is in port 1 NSJ I want to send one word from D197 (Cp1L) to D3000 in NSJ. My program for CP1L looks: When I execute the code I do not get any value in NSJ D3000 I am not sure what value should be for Destination unit number in C+2 and Communications port number in C+4 Thanks for clue Pawel -
I have a few questions about connection. 1) PLC has IP 172.16.20.220 , Scada PC has IP 172.16.20.127 On the PC with running scada software I can not established connection between CX programmer which is installed on the same PC and PLC - first I have to shut off scada software. I tried different ports number but no success. Scada or CX programmer on the same PC can't have connection and the same moment. Is it possible to make connection simultaneously? 2) I have VPN connection and when I'am connected to the LAN I get IP 172.17.20.x Second octet is different and last octet is dynamic and every connection it is changing. In such a situation how I have to set up routing table to get remote access to PLC from Cx programmer? thanks for clue Pawel -
I have to control some Inverters via Profibus. What software I need to set up a network. I read about CX Profibus, but CXONE upgrade does not show CX Profibus - only CX Configurator FDT. Is it the same or I have to purchase sth. more? Thanks for clue PAwel -
Hi I have alarm window on pop-up screen and it shows up when alarm occured. Is it possible to close the pop-up window automatic when alarm is cancelled? thanks for clue Pawel -
Hi ! I want to write program to control motion of Servo motor. I have CX ONE 3.05. What software do I need? Some program example will be useful. thanks in advance -
Can I set switch threshold for the sensor in this ABB relay. Anyway please write model of this relay. Thanks in advance Pawel -
Yes you are right - it is thermistor I have such a sensor integrated with moisture sensor to control ground temperature. Could you write model of this ABB relay - is it analog converter to signal 0..10VDC or something? regards -
I do not see card to read NTC sensor directly. How I can read by CP1H temperature using NTC sensor? Thanks for clue -
Hi I have problem to connect JX inverter to CX drive using cable RJ45 to RS232 - the cable is from Invertetr V1000. I have USB-RS232 adapter and it works everytime with different hardware , but now when I try to make autodetection I have no success.: I chose JX inverter , direct connection and I have only 4800 speed and after while I have info NOT detected What I am doing wrong? thanks for clue Pawel -
Hi I wanted to add Work bits to CP1L tags in NTXS but I do not see them. Is it bug or I have to use Link words for it? Pawel -
Assuming it is one character I would like to know aim of that. What for is sending character when the switch is pressed. What sequence I should find in PLC program to cooperate with such a key code. thank you -
I know they are 2 characters: 2648 - it is &H. What for designer could use this codes and if I use conversion I can just converse one character. f.e if I type &H I got 0026 regards
CJ1M-CPU12-ETN - ethernet unit setup
in Omron
Posted