pszczepan

You wrote LR12.12. I checked my PT settings and NT21 has just one word Notify area. So If I set it to LR10, PT shows that notification area is from LR10 to LR11. How I can find any information in LR12.12. Thanks Pawel

I want to display a message prepared in the NT Support Tool . String table has a value- "my message", word is 20 (why it comes 20? - I do not know) and I have PLC address set to DM 20. So, How I should write MOV instruction to display my message on the screen if my Control area is L0000 and Notify area is L0010 Pawel

I use CPM1A connected to NT21 via CIF01. NT21 has two RS232 ports. I connected NT with PC and at the same time I established connection with Support Tool for NT. My question is if I can monitor PC (CPM1A) via RS232 on the touch panel NT. Thanks Pawel

I know that battery for NT21 has 3,6 volts and 1500mAh. Port for this battery has 4 pins. Does anybody know wiring diagram for them? Pawel

It is mean that if I want to monitor PC via RS232 I have to disconnect cable from NT21 and make connection via another cable to CX Programmer. Can I make it without switching off CPM1A or I should switch off OMRON equipment to avoid internal demage.

Hi ! I will make an application which also store recipes in DM memory. I read about internal capacitor which can backed up DM memory up to 20 days. Is there any other internal supplier (battery.) which can backed up data in DM memory longer then 20 days. Pawel

Hi! I need to move bits (about 30) . I have old plcbook for CPM1 and there is perfect instruction XFRB. Right now iI am using CPM1A and I have info that this instruction does not exist in this model - is it true? -older model has it. So, maybe there is another instruction - I can use MOVB - but it's timeconsuming. Pawel

Hello ! Could you be more specific about using MOV to save recipes in my ladder program. My idea is writing recipe parameters via NT panel and I want to use indirect addressing to put them in DM memory. How I can transfer it to permament memory as you said. Thanks Pawel

Hi ! I will make an application which also store recipes in DM memory - I put recipes from NT panel - so I will use DM0000-DM1023. I read about internal capacitor which can backed up DM memory up to 20 days. Is there any other internal supplier (battery.) which can backed up data in DM memory (I mean DM R/W memory) longer then 20 days. Pawel

Thanks a lot. It helped me. I could not find these informations in CPM1A manual. Pawel

Hi ! I have CPM1A- 40... , output expansion unit CPM1A-8ER and analog I/O unit CPM1A-MAD11. I know IR addresses for PLC CPM1A-40, but I don't know what I/O addresses have my expansion units. Thanks Pawel