Moldenburg

I have only the. MER, which fetched from a panel view plus thanks

.MER es the file

hello people this message out this runtime application file was saved in an older format that does not support conversion to a development application as I can do to see this file? have more than 30 screens that does not work on my computer with factory talk view Station thanks note: use the factory talk view machine 6.00

Tip: click inside this box to load the editor

thank you very much

Hello everyone, I hope you can help me. I have a 1250 panel view plus two separate programs (program A and program B, but the view panel always starts up automatically with the program A What I have to do to start the program automatically form B? The two programs are in the internal memory thanks

my configuration of rslinx enterprise is bad

rslinx enterprise to configure the COM1 port and use the DF1 driver but this way I can not see the PLC to set tags, I have a PLC 5/10 connected to a KF2

if I have the rslinx classic configured with the COM 1 of my PC and I use rslinx enteprise then, should I uninstall the rslinx classic to use the COM1 port, My PC has only one serial COM

I thought I was clear about the connection but it is not, you can help explain I have a PLC5/10 Panel 2711P RDT12C view DH with an adapter which I connect to port PLC DH The PLC DB9 connector through KF2 and even connect it to my PC with the programs installed, and I have a simple program installed on the plc The panel view I connect it to PLC 5/10 through the port DH   In the studio I have the factory talk to communicate to the PLC file created in. MER, when downloading the file view pane I have to place it in the RSlinx enterprise, there begins my problem and not able to communicate It is to mention to you that taking the view panel connected to PLC 5/10, no LED lights com, I imagine having no lights no program installed, this LED only lights up when I plug the DB9 to KF2 to see my show ladder in my PC In factory program that believes in studio talk and I tried it from my pc and the plc receives the command sent him when I want to create a connection to DF1 fails me, says that the COM1 or COM2 or COM3 are in use The PC uses the COM 1 to connect to KF2 and the KF2 station number is 77 and the PLC station 3

hello, my question is factory talk machine: then compile and create the MER in factory talk studio, and downloading the program to view panel were installed all necessary programs like factory panel talk station? I hope to respond