SergioFer
MrPLC Member-
Content count
15 -
Joined
-
Last visited
Community Reputation
0 NeutralAbout SergioFer
-
Rank
Sparky
Profile Information
- Country Portugal
-
Hi i'm using an IFM controller AC1327 with ethernet gateway. I need to comunicate with him with visual basic .net. Can anyone help me Thanks in advance
-
I have removed everything form the web server, but the error stills there, i only manage to remove the error, if in the connection screen put the next screen: With this values i manage to get some values with one apllication called: OmromFinsIpRequestPro.exe Thanks
-
According to the user manual the CP1L-40M uses de DM32000, so here it is the DM table Is this one correct ?? Should i have FFFF or 0000 in the empty words Thanks
-
Thanks for the interest Here is the DM screen shot
-
Hello I can't find a solution, can you please give me some guide lines so i can explore a bit more? Thanks
-
Do i have to do some configuration with CX-integrator? If so how i do that, i've never used before. Any example, please Thanks
-
After a few more tests, i realise that if i put again the configuration of the screen 4 that i posted before, the error goes away. According to PMCR this shouldent be necessary, because i won't connect any other plc throw FIns TCP. Anyone have any ideas?
-
I have already delete all this items, and after this, the error Led from the CIF41 starts flashing, and i don't know what else is wrong in the configuration. I have tested, and with the the configuration that i post before i don't get any error. My question is if i have to do some configuration in the plc for this board? Because i don't find any place to do this, and in the manual, i don't find any description about this. I only find place to configure serial interface port 1 and 2. Wiht the CX-Programmer i get connection, even with the Error led Flashing, but in the vb application i can't get connected, but i used to get connected with the configuration posted before. Any idea? Does anyone ever used this configuration before and get it working? Thanks for everything
-
In the manual, it says this error is an device configuration error, but i don't know what is wrong in the configuration. In the CIF41 i have made the changes that PMCR sugest, and i think i have to made some configuration in CX-Programmer but i can't find where? In the CJ1, i have and devide configuration, but in the CP1L i can't find that? I haven't used too much the Omron PLC's, and i have never used FINS Comunication. I have tried to connect with CX-Programmer to the PLC useng Fins Ethernet, and it works. Thanks for all
-
Hello With this configurations i get the error led form the CIF41 blinking. I get the error code: 021A, and the detail code: 0004 Any ideas of what is wrong? Thanks
-
Can anyone check if my configurations in the CIF41 are correct: thanks
-
I have downloaded some examples and i have tried, but i don't get any answear. I only get one answear when i get connected. Can you, please build one simple FINs instruction to read word CIO0000, with 1 word of leght, from a remote IP 192.168.250.1, with node number 1, and a local IP 192.168.250.128, with node number 128. Mean while i will keep trying Thanks
-
Hi everyone I'm trying to learn how to comunicate with omron plc's throw ethernet, now i'm using an CP1L with a CP1W-CIF41 ethernet board, but i'm not having success. I think that the comunication protocol with the CP1L is the same as the CJ1. Does anyone know were i can find some detailed explanation on how to comunicate with plc's, and some vb application, so i can explore this issues. Thanks
-
Hi everyone I'm new in this things, but i'm trying to connect an CP1L with a CP1W-CIF41 card to my pc, and use fins comands, but i alway get the same answear: c0000201350001a00000010185010001 Can anyone help me with this Thanks in advance