SergioFer

Hi i'm using an IFM controller AC1327 with ethernet gateway. I need to comunicate with him with visual basic .net. Can anyone help me Thanks in advance

I have removed everything form the web server, but the error stills there, i only manage to remove the error, if in the connection screen put the next screen: With this values i manage to get some values with one apllication called: OmromFinsIpRequestPro.exe Thanks

According to the user manual the CP1L-40M uses de DM32000, so here it is the DM table Is this one correct ?? Should i have FFFF or 0000 in the empty words Thanks

Thanks for the interest Here is the DM screen shot

Hello I can't find a solution, can you please give me some guide lines so i can explore a bit more? Thanks

Do i have to do some configuration with CX-integrator? If so how i do that, i've never used before. Any example, please Thanks

After a few more tests, i realise that if i put again the configuration of the screen 4 that i posted before, the error goes away. According to PMCR this shouldent be necessary, because i won't connect any other plc throw FIns TCP. Anyone have any ideas?

I have already delete all this items, and after this, the error Led from the CIF41 starts flashing, and i don't know what else is wrong in the configuration. I have tested, and with the the configuration that i post before i don't get any error. My question is if i have to do some configuration in the plc for this board? Because i don't find any place to do this, and in the manual, i don't find any description about this. I only find place to configure serial interface port 1 and 2. Wiht the CX-Programmer i get connection, even with the Error led Flashing, but in the vb application i can't get connected, but i used to get connected with the configuration posted before. Any idea? Does anyone ever used this configuration before and get it working? Thanks for everything

In the manual, it says this error is an device configuration error, but i don't know what is wrong in the configuration. In the CIF41 i have made the changes that PMCR sugest, and i think i have to made some configuration in CX-Programmer but i can't find where? In the CJ1, i have and devide configuration, but in the CP1L i can't find that? I haven't used too much the Omron PLC's, and i have never used FINS Comunication. I have tried to connect with CX-Programmer to the PLC useng Fins Ethernet, and it works. Thanks for all

Hello With this configurations i get the error led form the CIF41 blinking. I get the error code: 021A, and the detail code: 0004 Any ideas of what is wrong? Thanks

Can anyone check if my configurations in the CIF41 are correct: thanks

I have downloaded some examples and i have tried, but i don't get any answear. I only get one answear when i get connected. Can you, please build one simple FINs instruction to read word CIO0000, with 1 word of leght, from a remote IP 192.168.250.1, with node number 1, and a local IP 192.168.250.128, with node number 128. Mean while i will keep trying Thanks

Anyone ?? Thanks

Hi everyone I'm trying to learn how to comunicate with omron plc's throw ethernet, now i'm using an CP1L with a CP1W-CIF41 ethernet board, but i'm not having success. I think that the comunication protocol with the CP1L is the same as the CJ1. Does anyone know were i can find some detailed explanation on how to comunicate with plc's, and some vb application, so i can explore this issues. Thanks

Hi everyone I'm new in this things, but i'm trying to connect an CP1L with a CP1W-CIF41 card to my pc, and use fins comands, but i alway get the same answear: c0000201350001a00000010185010001 Can anyone help me with this Thanks in advance