RDA
MrPLC Member-
Content count
23 -
Joined
-
Last visited
Posts posted by RDA
-
-
Certainly everyone is doing his job
-
you can not plc need to be slave with the panel you have to put a plc with ethernet port and connect the 2 hmi via switch
Regards
-
Run the files to a friend who has the software, and at the time of printing it does it on pdf files. -
-
no I'm trying to connect one of the serial Modbus slaves plc simulated using the funcion TXD e RXD. -
i tried tested, the serial work as slaves nt link, also function if com cx simulator and mode "display", as "real com" does non work, where i'm wrong. Greeting. -
Sorry my language, repeat the question, do you know the simulator cx send the serial pc which is turning the control that are written in the plc and posted on serial such as e txd rxd -
FRON TEST DONE THAT I SEE THOW IT WORK THE SIMULATOR AD SLAVES SERIAL AND WORK IF COM CONFIGURED AS SISPLAY -
HALLO THER IN SOMEON WHO HAS OPERADEC CX SIMULATOR WITH SERIAL EMULATED COM DE REALLY TURNS ON COM PC DE PC WHERE THE SIMULATOR? THANK YOU -
the real time clok rtc two are indipendent -
If probleam and software that he expired and maybe did a useless work and money spent. Under all circumstances however, you must have the source code to be downloaded into the new CPU -
hello navigators anyone has ever tried with cx simulator to simulate the network with eternet query from another external PC turns to where cx simulator? -
TRANSFERT THE #0 IF COMUNICATION ON TROUBLE -
do something simpler alternative measures of reading and writing with the system bit %S6 and see if it works in order to understand if the communication parameters are ok, after passing to increase the speed of queries -
sorry for my english, most likely it will not work well from the point of view of plant mechatronic ideal is to have a 3-way valve that works in mixing with one pid regulator that controls the output mix. -
Hi, test control cx protocoll if in case of error on a communication loop and active the jump to the next step or if you and stalling1 person likes this -
FUN 534 "OUT BIT" -
PIN 4 A+ PIN 5 B- -
-
ATTENTION THE ATTACHED FILE AND TO HAVE OMRON MASTER ON NET MODBUS TCIP, THE FILE THAT I ATTACH YOU YOU/HE/SHE HAS BEEN SIMPLIFIED IN HOW MUCH ONLY IP A PUTS ON THE OUTSIDE OF THE FB. YOU/HE/SHE HAS BEEN MADE A WILL WITH POSITIVE RESULT WITH OMRON MASTER AND MODICON (M340) SLAVES TCIP_CJ1.cxp -
Sorry this being the files Modbus_TCP_FB.zip -
Quando dici Che hai la rete a bordo vuol dire Che devi andate in altro TCIP Modbus o? Saluti
CJ1M - upload and rung error
in CX-Programmer
Posted
it could be the decimal separator, the tup pc is set dome vigola, while you want it as a point, the red zones are those with the decimal digits.