Tuesday, September 11, 2007 Praveen, I found out how to display the "@IsPresent" status from the RSI OPC Test Client! I was expecting to be able to browse the tag. When the Topic is configured with the processor type as PLC-5, you can't see any tags. Configure the Topic with the processor type as Logix 5000 and the Tags appear (except the "@" status type tags) and of course can be browsed in. Well, all you have to do to get the Topic with the processor type set to PLC-5 to work is just type the processor and tagname in the ITEM NAME box on the ATTRIBUTES tab using the RSI OPC Test Client! For example, to get back a value for the "@IsPresent" with a PLC processor named "BOILER", here is what one would type in the box: [bOILER]@IsPresent If you are using ControlLogix, and don't mind getting back a string value instead of a number, you don't have to add a new topic with the processor type set to PLC-5 to get the processor status. Instead, just use configure the topic as you usually would (Processor type set to Logix 5000), and use the @Status. If all is well, @ Status will return an "OK" string to you! Anyway, maybe this will help others with the same problem as the Tech Bulletin in the RSI website is not very clear on this matter. Thank you, Tim --------------------------------------------------------------------------------------------------------------------------