Grim Tinn

Hello I am experiencing some difficulty in enabling the publishing on VAT's from my CPU315-2PN/DP. I have enabled the CPU for WEB publishing and ticked the WEB box on each of the VAT properties. I then compile the hardware and download. I get all of the other WEB pages but no VAT tables, I'm sure this worked on a test rig but I can not get it to work in the real world. Have I missed something, could someone please provide a noddy guide to VAT publishing? Thank you for your time. Grim

Sorry for delay, been up to my eyes in it. We are in fact looking at the Ethernet option as a backup for data collection. The unit are rather expensive and for what a 2 bob chip and a plastic box. Thanks for the advice.

While it's not good news I appreciate your speedy response, I will have to look at the rather expensive Ethernet option. Again thanks Grim

Hello Folks I have a Q Series PLC which acts as a HUB to 4 CCL networks with numerous Q Series and Fx3 PLC's on them. The HUB PLC has an ethernet module in it which connects to the site network and OPC server. I can configure the Transfer page to allow me to program and monitor the Q Series PLC's on the CCL networks. However I can not configure the Fx3 Transfer Setups to allow me to do the same. The ideal is to access all PLC's via the HUB PLC as the chair in my office is rather comfortable. If you can help or give advise, you will me more helpful than my supplier and I would be very greatful indeed. Thank you for your time Grim