I've been working with the DL06 for approximately a year now (only PLC I've ever worked with). Now I need to get two of the things talking to eachother. I'd love to do an Ethernet system, but all four of my expansion slots are occupied. Today I spent a few hours trying to get the two talking using RS-232C through Port 2. I made my cable like this: RD-------------TD TD-------------RD CTS------------RTS RTS------------CTS GND-----------GND Assigned the secondary comm settings with my master being address 1 and slave at address 2, DirectNET. Then I just replicated the code from the DL06 manual just to test the communication, but I don't even see the lights for port 2 blinking on the PLC. Using rung like this on master PLC: |--LD | KF202 (Port 2, Slave Address 2) |_______ |-LD | K10 |_______ |-LDA | O2300 |_______ |-WX | V2000 ----------- Shouldn't I have some TX activity happening here? Am I completely missing something? Any input would be great!
