Jay Anthony

That looks like the answer...  Worth a try...

  Monitor Mode.doc

Sorry.  It's not that easy.  You need an install DVD for the new computer.

Ask the manufacturer for the project directory.  He may have to zip the directory

Try Data Linc. I have used them before. http://data-linc.com/plr6130-serial/

Maybe a second NIC card to handle the HMI...What about wireless Ethernet to HMI.. How about wireless serial?  (I checked your IP.  You must be in Automotive in the Big T.) I'm gonna knock this around with some kool Omron guys.

Maybe you should opt for a USB connection locally at the HMI...

Are you using a point to point direct Ethernet cable?

 

View File Modbus Slave for C200H/C1000H/CV1000 PLC Modbus Slave for C200H/C1000H/CV1000 ASC02 Submitter Jay Anthony Submitted 08/08/17 Category Utilities

Omron always kept me in toys.  That's what they were...toys! 

You are awesome, innoaloe! 

Apologies for the title fonts 06A_CX-D Pop-Up Screens, Sheets and Frames_020907.pdf

Definitely use separate rungs!!!

Post a picture of your ladder Rung 0...

Starting DM area for this position control unit 0 starts at DM20000

Good Call, innoaloe! 

Thank you imblink.  Good info!

You must have a Rs232 to RS422 adapter to connect USB CIF31 to SCU31-V1. Check B&B Electronics website for a converter.

SCU31-V1 is a dual RS422 card whereas the CIF31 is an RS232 connection.  These two are not compatible.

No worries, man.  Don't let ebay get you down...

Check the following manually using the memory utility: DM 20100=#0001 DM 20101=#0010 Sometimes the I/O setup utility does not setup the values correctly...  

No, that is for shielded inputs.

Congratulations to the AB PLC forum for achieving 50,000 posts!