Asrarmeryem

Hello, I am reaching out today to ask for your assistance because I am in need of your help. My internship project revolves around the communication between Rockwell components and the Schneider controller. I have utilized EtherNet/IP communication and added the EDS files of the components into Control Expert Classic (V15). My issue lies in successfully communicating with the drives; while I have managed to establish communication with Point I/O, I have been unable to do so with the drives. I have a PowerFlex 400 series B drive with a 20-COMM-E series A card. I have added the drive's EDS file into Control Expert Classic. Additionally, I have a PowerFlex 700 series B drive with a 20-COMM-E series B card. I am nearing the end of my internship (final study internship), with only 2 weeks remaining, so I am earnestly hoping to find assistance. Please, help me. Details: Schneider Controller BMEP582020, PowerFlex 700 series B drive model: 20BC3P5A0 AYNANC0 (V 8.002), with 20-COMM-E series B card (V 4.001), and a PowerFlex 400 series B drive model: 22CD022N103 (V 8.002), with 20-COMM-E series A card (V 1.007).

 

Hello everyone, My name is Meryem and I am starting my internship this month. The first task assigned to me is to establish communication between a Schneider PLC and a Rockwell (I/O point and variable speed drive). As I am more familiar with Siemens, I am facing a challenge since the company knows nothing about Schneider. That's why I am reaching out to you, because despite my efforts for the past two weeks, I have not yet found a solution... On one side, I have an M580 (BMEH582020), and on the other side, a 1734-AENT Point I/O and a 22C-D017N103 variable speed drive. The idea is to be able to read inputs/outputs/other data from the Point I/O and the variable speed drive from the M580. We will be replacing the Rockwell 1783-MS06T with the Schneider M580. Has anyone encountered this type of communication before? Thanks in advance! :)

Bonjour à tous et à toutes,Je m'appelle Meryem et je commence mon stage ce mois-ci. La première tâche qui m'a été confiée est d'établir une communication entre un PLC Schneider et un (point I/O et variateur) Rockwell. Étant plus familière avec Siemens, je suis confrontée à un défi puisque l'entreprise ne connaît rien en Schneider. C'est pourquoi je me tourne vers vous, car malgré mes efforts depuis deux semaines, je n'ai pas encore trouvé de solution...D'un côté, j'ai un M580 (BMEH582020), et de l'autre côté un Point I/O 1734-AENT et un variateur 22C-D017N103. L'idée est de pouvoir lire des entrées/sorties/autres du point I/O et du variateur depuis le M580. Nous allons remplacer l'automate Rockwell 1783-MS06T par le Schneider M580.L'un ou l'une d'entre vous aurait-il déjà été confronté à ce type de communication ?Merci d'avance!