Glen7829

MrPLC Member
 View profile  See their activity

  • Content count

    8

  • Joined

  • Last visited

Posts posted by Glen7829

  1. Posted

    I did connect MR Configurator 151E to one,  but i only seen software version. No serial number.  I have also looked threw both of those PDFs and nothing about serial number.  I am able to communicate to it just cant find a way to ask it ... whats your SN#  

  2. Posted

    I have a test station to test MR-J2S Servo drivers,  I am looking for something unique in the drivers to be able to save data about that test.  First thought was the SN, but i am not seeing any way to pull serial number from the driver. Only found it on the side of driver and really don't want people having to type it in , cause usually they type in the wrong numbers.  Does anyone know of a way to get the serial number out of the driver? or at least where it could be found?  Or any other unique identifier in these drivers?

     

  4. Posted · Edited by Glen7829

    forgot to unplug ,  but now the peakhmi is sending and receiving  so that's good start!

     

    Program i made is now also sending and receiving.  not exactly receiving what i want.. but ill take it lol. 

    i guess changeing the port to 5001 and 5002?

     

  7. Posted · Edited by Glen7829

    Hello Mark, 

    i tried that and same thing,  it will send but never receives. The count for sending keeps going up but nothing is returned,  when i try to do the bits it will show that its keeps reconnecting and then timeing out , then reconnecting...ect..

     

    Also if i have UDP setting , i cant select anything in the open system field. its just blank

     

     

  8. Posted

    Hello, 

    I am trying to communicate with a QJ71E71 , via a PC  I am using the melsoft protocol via a software called Delphi that i created.  As of now i am able to ping the E71 , but when i send data (loop test)  it does not send anything back. 

    I have started with a loopback test as it seemed easy enough. 

    i send this according to wireshark. but nothing in return.  Is there something i am missing?  do i need to have any ladder logic in the PLC to communicate via UDP?  Thanks

    54001234000000FF03FF0000210010061900000005ABCDE

    Settings are as follows:

    Module 1

    Network type : ethernet

    Start IO: 0020

    network no, group no , station no : 1

    status Online

    OPERATION SETTING are as follows

    ASCII Code, Always wait for OPEN, Enable Online Change is true. 

     

    for Open setting

    protocol : UDP

    fixed buffer : send

    fixed buffer communication : Procedure Exist

    Pairing : disable

    Confirmation : no confirm

    Host station port 4001

    then my IP and Port is 1398  not sure if correct port? or if that matters?