mystikaldrizzle
MrPLC Member-
Content count
19 -
Joined
-
Last visited
Everything posted by mystikaldrizzle
-
Hello all, I am new to using Mitsubishi and I am having issues communicating with my Cognex Camera. I have the camera configured in Datamn Setup Tool. I have the Ethernet card configured and validated. I am able to ping both devices and get a response on the network. However, I received an SLMP failure in Dataman and there's no communication between my camera and the controller. Please see the attached photos to view how I have the camera and PLC configured.
-
Thank you so much for the information!!!
-
Hello all, I'm tasked with integrating 4 Mitsubishi brand SCARA robots to an iQ-R controller. Would the best method be SLMP communication protocols? Or if someone has done something similar in the past, what did you do?
-
Hello, I will be using a CR800D
-
I will give this a try later on today and provide feedback! Thanks so much for the response!
-
Hello all, I am new to using Mitsubishi and I am having issues communicating with my Cognex Camera. I have the camera configured in Datamn Setup Tool. I have the Ethernet card configured and validated. I am able to ping both devices and get a response on the network. However, I received an SLMP failure in Dataman and there's no communication between my camera and the controller. Please see the attached photos to view how I have the camera and PLC configured.
-
Let me give this a try! Good Afternoon! DataMan cameras can not be configured in In-Sight and vice versa. In-Sight Explorer wouldn't be able to find a data man camera either.
-
Good Afternoon! DataMan cameras can not be configured in In-Sight and vice versa. In-Sight Explorer wouldn't be able to find a data man camera either.
-
-
-
Will do!
-
Since I'm attempting to use SLMP protocols I am not able to arm the trigger.
-
Single External
-
Good morning, I gave it a try with no success unfortunately. I appreciate you giving me your suggestion!
-
Update: I've made a support request with Cognex. Hopefully, they may be able to offer some insight. I appreciate the help and responses! I will update once this issue is resolved, just in case anyone else runs into this issue!
-
I attempted to Utilize all the options in the Destination drop-down box. I also brought my Data Registers to D100, D102, and D104 respectively. I get the same feedback that the configurations are correct from colleagues but the problem persists. I'm going to keep playing with this and if I can make this work I'll explain what/where I went wrong.
-
Here are the options in the drop box. I will attempt to reassign the Data registers and see if that helps! Thanks for the response!
-
I reselected IQ-F CPU I do not have errors when the camera tries to connect. I appreciate your responses and help!
-
Gambit, Thanks for the response the options are as follows: QCPU LCPU RCPU IQFCPU AND FXCPU I have tried all the above settings and still the same result. For clarification I am using an FX5U Controller with an FX5 E-NET Card.
