Posted 16 Feb 2017 Hi All, I'm testing Cx-supervisor communication with ODT Micropower PMAC controller on modbusTCP. I'm able to establish the communication using ModbusTCP driver with cx-supervisor. But, data I'm getting in is Low word first, so not able to convert properly. If anybody has tried any other option/script for this issue? I did not found any setting in Cx-Supervisor as in Kepserver, shown in attachment below: How can we swap the registers read as a 32 bit word from controller? Thank you. Share this post Link to post Share on other sites
Posted 15 Oct 2017 Hi This sounds like “Big-Endian” versus “Little-Endian” format. No I’m not aware of CX-Supervisor or PMAC controller option to swap the Endianess. Regards BB Share this post Link to post Share on other sites