Omron C200 and LK201

[desuhardi 0]

Hello, I'm trying to get program from running C200 CPU Omron, with LK201 Host Link. But when install LK201 on CPU, ready led is lit for a while, then change to error led on LK201. With this condition, I can not connect Syswin with CPU, even change with possible configuration at LK201 for baud rate, parity etc. Please help how to solve this problem. Thank you

[Jay Anthony 118]

1. Is this a rack mount C200H-LK201 Hostlink? 2. Is this a CPU Mount 362A6-LK201 Hostlink? 3. Is this a CPU Mount 3G2C7-LK201 Hostlink? 4. How many C200H-LK201 modules do you have mounted to the rack? 5. Please check the dipswitch settings against the enclosed pdf. 3G2A6-LK201 and RS232 comm cable and dipswitches.pdf

[asef_57 0]

Hello Please help me!! I have a PLC system C200H,CPU 01 with LK201 modules. When the PLC power is turned ON. The ERROR LED of CPU blink and RUN LED is lk201 is off. Could anyone help me how to check and slove this problem? Thank you!

[Jay Anthony 118]

How many C200H-LK201 modules are in the system? There is a limit of two.