TakeshiAhogata
MrPLC Member-
Content count
7 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Calendar
Everything posted by TakeshiAhogata
-
Ok, i understand ,thank you so much
-
How configure communication between FX3U-64M and GOT1050? HMI GOT1050 have two chanels availables: RS-232 and RS-422 PLC support RS-422 but i don't know how to configure PLC parameter for establishing comunication with it
-
Ok, i will try with this cable configuration, but in the PLC parameter configuration,wich option i select in "H/W type"? because only have two options to select RS-232C and RS-485 and the cable configuration is RS-422
-
I have the same problem, can you tell me which is the PLC programmings settings or explain how did you do that? If you can do a tutorial, you will help me so much.
-
but i need the pinout of mini din 8 pin, is the terminal incorporated in FX3U-64M, like shown in the image below but in RS-232 confiuration
-
so, which is the cable pinout for connect the CPU to the HMIin case of select rs232 protocol?, because i know that this PLC only use RS422 for communication, but i'm not sure if it's possible work with RS232, for that i need the pinout for make two cables, one for RS232 DB9 to MD8 and other for RS422 DB9 to MD8
-
but would be the same baud rate between both