rbbalaji

MrPLC Member
 View profile  See their activity

  • Content count

    5

  • Joined

  • Last visited

Community Reputation

0 Neutral

About rbbalaji

  • Rank
    Newbie

Contact Methods

  • ICQ 0

  1. Usefull stuff?

    rbbalaji replied to Mark The Spark's topic in Computer Help and Networking

    that was an excellent thread.

  2. CJ1M-CPU13 and SCU21

    rbbalaji posted a topic in Omron

    Hi, I have transmitted data to a computer from my Omron CPM2A by using the TXD command. I want to know how do I do the same with my CJ1M. I have a SCU21 attached to it. In the CPM2A I had a switch which I had to turn ON(or OFF i dont remember) to use the peripheral port for transmitting data. To do this I had to go to the setting and select both the Host Link Port and the Peripheral port to RS232. How do I go about this with my CJ1M? Do I have to go to settings? Also in the CPM2A the control word with the TSD command told me whether it was the host link port or the peripheral port. I used 1000 for Host Link and 0000 for peripheral I think. Do I have to use the same control word with the CJ1M SCU21? Any help with this would be appreciated. Thanks Guest

  3. FUTEK Force Gauge

    rbbalaji posted a topic in General Topics - The Lounge

    Has anybody here used FUTEK force gauge. I am not able to display my reading in Newtons. It seems to have its own scale. Any advice would be appreciated.

  4. cpm1a-cif01

    rbbalaji posted a topic in Omron

    Hi all, I am looking for a plc to computer adapter cable omron part number cpm1a-cif01. Please let me know where I can get it at the lowes price. Thanks Balaji

  5. I/O ERROR in CPM1A(CPU30)

    rbbalaji posted a topic in Omron

    Hi Jay, I was rebuilding an old fixture and I have encountered this strange problem. When I connected the sensors, the sensors were showing weird signals. That is part present if no part is present, when I used the ground in the DC power supply(AC to DC). I was frustrated and removed the ground and added a DIODE acreoss the output and all seemed well. Until this morning when I turned the system ON I encountered this ERROR in the PLC and when I connected the hand held it showed an I/O ERROR. Then I turned the system ON and OFF several times until the ERROR disappeared. And now after everything seemed fine I was just testing the fixture this evening and after about 20 trials this problem occurred again. And I turned the system ON and OFF but it was of no use until I pulled out the pressure. Then I turned it ON it is fine now. But I am worried that this should not occur during production time. What should I do. By the way the input is 24VDC and two of my utputs are 24VDC and one is 110VAC. Thanks, Balaji