Posted 14 Jan 2020 Whenever I try to go to the communication setup on FT View studio I get the following alarm: Unable to communicate with the FactoryTalk Linx server "localhost" -Verify the server name is correct -Verify the server's host computer is running -Verify that the Ethernet cable is plugged in I had been able to use FT View Studio before but it just started showing this message. Does anyone have any ideas how to fix? Share this post Link to post Share on other sites
Posted 24 May 2020 Im having the same problem, did you fix it? Share this post Link to post Share on other sites
Posted 24 May 2020 2 hours ago, mandrake8810 said: Im having the same problem, did you fix it? Yes. I will post 2 links that I found to fix it. The second link was the one that helped me. Basically my Display scale and layout for my PC (windows 10) was set to 150%. It needs to be 100%. If not it starts to flicker and give communication error. I do not know if this is your issue but look at the links below. https://rockwellautomation.custhelp.com/app/answers/answer_view/a_id/33551 https://rockwellautomation.custhelp.com/app/answers/answer_view/a_id/568264 Share this post Link to post Share on other sites