RJ71PN92 Profile

[Eccu 0]

Does anyone know where from Mitsubishi pages I can download RJ71PN92 profile.

I updated GxWorks3 to version 60 from version 57, but something went wrong and I was forced to use Mitsubishi Clean Tool and probably then the profile information vanished.

I can't open anymore my GxWork3 project.

[Eccu 0]

Problem solved by reading MELSEC iQ-R Profinet IO Controller manual:

"Profile of the RJ71PN92 are automatically registered in GX Works3 during the installation of GX Configurator-PN "

If you see attached window when you try to open your project, install first GX Configurator-PN. And read manuals :)

[krishna k 3]

9 hours ago, Eccu said:

Problem solved by reading MELSEC iQ-R Profinet IO Controller manual:

"Profile of the RJ71PN92 are automatically registered in GX Works3 during the installation of GX Configurator-PN "

If you see attached window when you try to open your project, install first GX Configurator-PN. And read manuals :)

Hi ,

    Thanks for Updating the Solved method in this Forum.It will be useful to all.