Posted 7 Jul 2016 WHY SENDING AND RECEIVING SIGNAL NOT BLINKING WHILE CONNECTING THE QJ71E71-100 TO GOT 1000 THROUGH ETHERNET CABLE? Share this post Link to post Share on other sites
Posted 7 Jul 2016 Ethernet cable is faulty Melsec communication driver is not installed on the GOT GOT communication settings are incorrect QJ71E71 is not configured correctly as described in manual IP address of GOT is exactly the same as PLC +1 (or +2 or any other number) if there is nothing else on the network. If there are other devices on the network make sure the GOT has a different IP address to all of them and is not using the same port as anything else Share this post Link to post Share on other sites
Posted 8 Jul 2016 thank you luke ......but the GOT1000 IS COMMUNICATED WITH PC Share this post Link to post Share on other sites