PLC 5. Put a zero into a DeviceNet Integer

[Conor 4]

Hi guys, I have a Flex I/O with an Analogue Input card. One of my Analogue Input connected instruments is gone faulty. I have an instrument fault on my Scada system. When I checked where this alarm is coming from, I found that it comes from the Under-range flag in the Flex I/O. My question is how can I move a zero into just this single bit? N9:85 is the word N9:85/4 is this instruments under-range flag I was looking into doing a Masked move, but I don't want to put zero's into all bit of the word Thanks, Conor

[dmargineau 6]

"Hot Rung" an OTU of the N9:85/4 address.

[Conor 4]

Thanks, I will try this tomorrow as am finished for day now P.S: I tried that this morning but it didn't work. The bit was flashing on and off, and therefore the Alarm was flashing on the Scada. Edited 26 Sep 2013 by Conor