How to display measurement in HMI

[Lachuu 0]

Hi All, I'm starer in HMI. So please help me out in doing this. PLC: CP1E-N20DR HMI: NS10-TV00B-V2 Concept is simple. I need to measure the length of the sheet coil. I got metal detecting sensor. Once I got signal from sensor I will start timer. Formula going to use is Length = Speed x Time ( Speed is Constant) Not using encoder in this project. So please help me in finding solution for PLC and HMI Regards, Lachuu

[Grisha 0]

Hi Lachuu, First of all i not recognized with this devices but the concept is very simple, most of the HMI panels permit to make on a display of a value a calculation, so on from this point you can write down this simple equation with your constants and variables according to your PLC. Good luck, Best Regards, Greg.

[Lachuu 0]

Thank you Greg

[Grisha 0]

You are welcome!