Omron PLC C40H programming

[stojakovicv 0]

Dear sirs, I have Omron PLC C40H with control pannel attached to serial port. I have made cable to connect to PLC over serial port (host link). I successfuly go online over serial port, but I can not use control panel in that case. My problem is how to connect my PC with SYSWIN and control panel simultaneously to PLC. Is there possibility to connect SYSWIN to console port on PLC? Which cable to use? Is it possible to do that way? Regards, Vladimir

[svn 0]

There are two possibilites - 1) Mount Host Link unit 3G2A6-LK201 on peripheral port and connect it with corresponding RS232 cable to serial port of PC 2) If your CPU model no. ends with -EV1 then you can mount C200H-IP007 on peripheral port and connect it with CQM1-CIF02 cable to serial port of PC Hope this helps SVN

[stojakovicv 0]

My CPU is: C40H-C20R-DE-V1 02X2 Is that mean that I can use C200H-IP007 on peripheral port?

[svn 0]

It seems so. Please see attached datasheet for C200H-IP007. Please re-check with local Omron representative. Regards, SVN C200H_IP007.pdf