Sena LS100/TCP to Allen-Bradley DF1 Port

[cabbage 0]

Hi all Had a few problems setting up this device to work but got it going in the end. http://www.sena.com/products/device_servers/hd_lite.php When setting up the device make sure RSlinx is shut down telnet into the Sena LS100 In my case (your IP address will be different) telnet 192.168.1.175 username: admin password: admin Host Host_mode: tcps Local_port: 6001 Inactivity_tomeout: 0 Serial Baudrate: 19200 Data_bits: 8_bits Parity: None Stop_bits: 1_bit Flow_Control: None DTR_option: Always_high DSR_option: None Interchar_timeout: 50 Run >> Serial-IP >> Control Panel Your good to go I've missed out a few things e.g. DHCP settings, but assuming you using a DHCP server just plug and play Note : Serial settings used are for default controllogix See Below: Another device i found to do the same job with pinouts AB_DF_1_to_ED10__ED_10.pdf Edited 16 Feb 2009 by cabbage