Posted 15 Oct 2008 Did anybody have experience with ethernet communication between FX2N PLC and SCADA system? We have a Mitsubishi FX2N-64MR PLC onsite. We are trying to implement a scada system on a desktop PC which is 100 meters away from the PLC. I am thinking about adding an ethernet module FX2NC-ENET-ADP+FX2NC-CNV-BD and installing MX-OPC server or KepwareEX OPC server on the desktop PC. However, in the FX2NC-ENET-ADP manual, it states that "THe FX2NC-ENET-ADP enables the upload, download, monitoring and test of a program from the personal computer (GX-Developr or MX component) via Ethernet". Does somebody have the experience to use the Ethernet module? Share this post Link to post Share on other sites
Posted 15 Oct 2008 Hi, I did all the testing and documentation for that and helped several customers impliment it. the FX2nC-Enet-ADP module actually works much better than the original module that was released in Europe. It allows 2 connections so that you can do data collection and connect the programming sofware at the same time. If you follow the instructions in the Kepware Mitsubishe FX driver help file you should not have any problems. If you do then contact technical.support@Kepware.com. It is a free service and if they can halp. Fred Loveless Senior Applicaiton Engineer Kepware Technologies Share this post Link to post Share on other sites
Posted 3 Dec 2008 Clearscada2009 + Kepware OPC server + Mitsubishi FX2N + FX2NC-ENET-ADP + FX2N-CNV-BD. Share this post Link to post Share on other sites