DL05 and D0-07CDR card

[pfort 20]

Hi all, i am new to Koyo and experiencing a problem: I have a D0-07CDR card (4 in, 3 relays out) in a D0-05DR PLC. Outputs for the card are Y100, Y101 and Y102. I was never able to close contact of theses 3 relays. I have no problem to close contacts of Y0 to Y5, forcing them or programing them, but, even if i try the same way with Y100 to Y102, nothing happen with them. Anyone have an idea?

[rlp122 4]

What version of firmware is in your DL05? You can check by going to PLC -> Diagnostics -> System Information. It must be at least version 4.10 or greater.

[pfort 20]

Is it CPU version? if yes, it is 5.20

[pfort 20]

OK i tried the card in another PLC (DL06) and it worked fine, so i will order another DL05 assuming it is defective.