Search the Community

Is it possible to run the NJ simulator in Sysmac Studio and have it communicate with a real NA HMI? Thanks.

I'm just starting to learn Ladder Logic Programming. I'm using Allen Bradley RSLogix 5000. I've been tasked with developing a 'Simple' Coffee Machine which operates like so: Toggle Push Button to StartDrop Cup (for 10 seconds)Feed Hot Water (for 10 seconds)If required, Add Milk (for 10 seconds)If required, Add Sugar (for 10 seconds)Procedure Complete - Illuminate Complete Light (for 10 seconds)I have implemented everything except the OPTIONAL add Milk & OPTIONAL add Sugar. Options are: To have a Coffee without either Milk or Sugar.Or have a Coffee with Milk and Not Sugar.Or have a Coffee with Sugar & Not Milk.Or have a Coffee with BOTH Sugar & Milk. I'm considering using Toggle Buttons to select / jump to a Subroutine (choosing the required ingredient make-up). But I'm wondering if there is another way to sequentially go through the procedure? Thanks. http://stackoverflow.com/questions/26930902/ladder-logic-simple-coffee-machine-optional-add-milk-add-sugar?noredirect=1#comment42839041_26930902

I'm having a bit of difficulty with the MSG function on a logix5000. I'm simply trying to get a REAL value ("BH5_Flow") out of another logix5000 and assign it to a tag in the PLC. I've created a MSG function and created a new tag "BH_5_Flow_MSG" for the message, and created "BH5_Flow_M" for the value that will come from the MSG function. When I click the "..." button to bring up the config, I put the following in: Message Type: CIP Data Table ReadSource Element: BH5_FLOWNumber Of Elements: 1Destination Element: BH5_FLOW_MIn the PATH tab, i then put the following in: Path: LocalENB, 2, [iP ADDRESS OF SOURCE MACHINE]When I test the edits, I then get the ERR bit activate with error 16#0004 when the message rung runs. Anyone got any ideas where Im going wrong? I've practically copied another MSG instruction from further up the ladder but it doesn't seem to work