gowthamsudherson

MrPLC Member
 View profile  See their activity

  • Content count

    10

  • Joined

  • Last visited

Posts posted by gowthamsudherson

  1. Posted · Edited by gowthamsudherson

    Hi experts,

     

    I need to generate the batch report for my project without any script , i check in our forum but previous links are all deleted.

    Can any one please provide sample backup please ?  

     

    Because i am really confused to achieve the batch process.

    In Report generation we can print the PDF file which the data's are already entered in that particular page but my requirement is, i need to take print out the following details

    1.The parameters should be stored in report from my batch start to batch stop with date and time.

    2.And also i want to take report for some particular dates (that dates should be selectable from HMI) 

    Any idea how to do this?   

     

    Please see the attached image (example) and am badly need this please help me 

    https://youtu.be/tvao1QLlHnM

    2.JPG

  2. Posted

    Dear Experts,

    I want a sample block to find out the status of my Profinet cable w.r.t Hardware configuration.

    whether the cable is connected or disconnected from the node.

    Either my nodes may be VFD, HMI, SCALANCE, etc... 

    please share the sample blocks...

    S/W ===== >Tia portal v14 sp1 update 6 

    H/W ===== >CPU 1214C DC/DC/RLY

    hanks in advance

  3. Posted

    Dear Experts,

    I want a sample block to find out the status of my Profinet cable w.r.t Hardware configuration.

    whether the cable is connected or disconnected from the node.

    Either my nodes may be VFD, HMI, SCALANCE, etc... 

    please share the sample blocks...

    S/W ===== >Tia portal v14 sp1 update 6 

    H/W ===== >CPU 1214C DC/DC/RLY

    hanks in advance

  4. Posted

    Dear Experts,

    For alarm logging and trends i need clarification of Limitations of range as following

    1.How many alarms can be logged in Alarm buffer (please dont explain only in terms of memory) 

    2.If alarm buffer size is vary for each HMI means where shall i found whether it is in any documents or it is in hardware set up?

    3.How many trends can be log without memory card and with memory card (please dont explain only in terms of memory) if the following is true then it will suitable for all HMI's ?

    There is the buffer size maximum 999 Values. The time span depends on the setting you set at "Source setting" -> "cyclic" of the trend.

    for example if you use 1s then every second there will be saved a Value in the buffer and if you use 999 Values the time amount will be only 999s.

    But if you use 10s as setting for example the Buffer´s time amount is 9990s.

    Thanks in advance.

  6. Posted

    No it should not open only Tia v13.1 will open the all previous version of Tia portal .

    And Tia v14 opens the Tia v13.1 

     So thats the problem ............and its okay thanks for your support.........

    i started to develop my own block in tia v14...........

  8. Posted

    Hi experts,

    please share the sample blocks for the EDITABLE TIMER block it should be editable from HMI(Siemens).

    And also motor run hour block.

    Actually i am having all blocks in tia v12 version and sadly i dont have the old software to convert it again.

    So please share the blocks that it shoud be work in TIA V14 for s7 1200 plc's.

    Please note that the blocks should use add instructions to calculate the time because i don't have much memory.

  10. Posted

    Hi experts,

    Am using the CPU type CP1E PLC and AI module CP1WADO41, my doubt is that as per the attached manual For 'D0' we will get the raw value as counts from AI module.

    With help of this value how shall we scale the range ?

     for example:

    My minimum value is 0 kg

    maximum is 1000kg

    with above example we will get the raw counts from PLC and how shall i convert into a scale (as my application)? 

     

    OmronAI.PNG