Pardi

MrPLC Member
 View profile  See their activity

  • Content count

    3

  • Joined

  • Last visited

Posts posted by Pardi

  2. Posted

    On 2/18/2017 at 8:22 PM, VISHNU SINGH said:

    Hi, 
    Can anyone advise on this problem I am having with a Micrologix 1200 plc, at random times during the run phase (while the machine is running) the machine would stop because the plc has a flashing fault light, i connected to the software of the plc with the laptop and found a fault state inside the plc, reset the fault and continue to run mode, it now works fine, can anyone advise on why this fault mode becomes active or enabled? 

    V

    Hi Vishnu,
    I am facing similar issue with MLC 1200 and we have this with several PLCs. Can you please explain stepwise how to reset Fault and resume RUN state.
    Thanking you in anticipation.
    Regards

  3. Posted

    Hi,
    Can you provide link to the information page where function and interpretation of each flashing or steady LEDs on MLC 1200 is explained. For example where to look for when Fault LED flashes during normal operation and so on. Thanks in anticipation that someone will help.
    Regards