Chris Marlin

MrPLC Member
 View profile  See their activity

  • Content count

    2

  • Joined

  • Last visited

Posts posted by Chris Marlin

  1. Posted

    Dear Fellow Members,

    I had a major breakdown in the PLC Control system due to sudden power outage in the plant.

    To cut a long story short we had to re-upload the program, the program was successfully reloaded but currently we have no communication between OP30C and CP 5431 ( 6GK1543-1AA01) - we are also in the midst of a major upgrade to the line including the control system.

    We have encountered this issue a month ago and we have thoroughly investigated the issue and according to an experienced Siemens engineer we are missing the Comgraph V.2.32 or A2.32 to configure the communication processor with the OP30C and S5.

    If you could be iso kind to upload a link ( or send me a pm for Email )  for the Comgraph V.2.32 or A2.32 ( if you still have it ), I will buy them a big round of beer or even better offer you money beerchug.gifbeerchug.gifbeerchug.gifbeerchug.gifbeerchug.gif

    Much appreciated Sir and thanks a million in advance.

    Chris

  2. Posted · Edited by Chris Marlin

    On 7/27/2005 at 0:25 AM, Kiwikev said:

    Right then, I have finally managed to get hold of the software required to program the CP527, unfortunately the book is as usual for a S5 book bloomin' hopeless - so have any of you older gentlemen out there used this package / know where there might be a more informative manual - I have the COROS Config Software COMGRAPH Planning guide ( C79000-G8576 - C190) Any help would be greatly appreciated.

    Dear KiwiKev,

    I had a major breakdown in the PLC Control system due to sudden power outage in the plant.

    To cut a long story short we had to re-upload the program, the program was successfully reloaded but currently we have no communication between OP30C and CP 5431 ( 6GK1543-1AA01) - we are also in the midst of a major upgrade to the line including the control system.

    We have encountered this issue a month ago and we have thoroughly investigated the issue and according to an experienced Siemens engineer we are missing the Comgraph V.2.32 or A2.32 to configure the communication processor with the OP30C and S5.

    If you could be iso kind to upload a link ( or send me plz a private message )  for the Comgraph V.2.32 or A2.32 ( if you still have it ), I will buy them a big round of beer beerchug.gifbeerchug.gifbeerchug.gifbeerchug.gifbeerchug.gif

    Much appreciated Sir.

    Chris



    Thanks a million in advance.