pv550
MrPLC Member-
Content count
63 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Calendar
Everything posted by pv550
-
Hello, I have a problem in mitsubishi E600. The problem is when power on the hmi it is stuck in booting screen (i.e booting file system). so, i wanted to update the firmware in hmi. how to update the firmware. Please explain...
-
Hi I have pv plus 400 HMI. I want to take backup from the hmi. I want to set IP address in settings. I want to go to configuration mode. How do i go to configuration mode. Please help me.
-
I tried that also. when i press f1 button it cause error fatal 31. what shall i do?
-
My pv plus 400 is a keypad HMI. There is no possibility to touch the screen. and also there is no white box will come during boot up. Then how do i go to configuration mode??
-
Hi I have wincc flexible 2008 sp3. I can able to take the backup from op77A. But i cant able to view the tags. What is the reason for that? I want to view the tag to edit it. How do i view the tag please explain.....
-
I dont know the software to update firmware.please tell which software can i used to update the firmware.
-
sir, My question is how to callibrate the e1061 touch screen.
-
Thank u for the reply sir.
-
No,sir ERR/ALM is not flashing.Power led is lit and run led is flashing. I had 4 omron cp1e plc. In that 4 plc one plc is in good condition power led is lit and run led is also lit. I can able to communicate this plc to cx-programmer software.Remaining all other plc condition is power led lit and run led is flashing. This plc wont communicate with cx programmer. i think run led is flashing is the problem that plc wont communicate with software. What is the solution for that problem? pleaase help us...
-
hi guys,i want some detail in omron plc CP1E-E20DR-A,my problem is run led is flashing for CP1E,so this plc is not communicate to pc.plse any body tell me what promblem.
-
Thank u for the reply.So,Finally what is the solution for this problem? we have also tried the image loader for E 1061. But that is not an effective one. After update the image loader the display will become blank there is no letters are there,simply blank. I think that image loader file does not match the E 1061 HMI. Now, what is my question is how can i bring back the HMI to old condition(good).
-
hello, plse help .i have promblem for transfering the program to the mitsubishi e1061 hmi panel using Beijer e-designer v7.50. I managed to receive a program from the panel into e-designer software using a RS232 serial cable .my problem is i can able to receivet he program from e1061 to pc ,in that program there is no alarm images are there like e615. For example: if the fault is in the machine and i go to see the display no images there only alarm letters are there
-
hi sir in my pv600 pluse complain is FAULT: Cannot find "mecompcrc"(or one of it component)make sure the path and file name are correct and that all the required libraries are available. THIS fault is come sir and then after hand symbol the circle is come .please tell anybody how to solve the problem.
-
hi sir the pv600 pluse hmi hand symbol is coming ,so no communicate to pc. Plse any help.my hmi catalog number is not given because it is metal panel. but i tell some detail the hmi back side is one serial port and usb port and one ethernet port. plse sir how to clear the hand symbol.
-
Communicating with a Panelview 550
pv550 replied to welly1983's topic in Allen Bradley / Rockwell Automation
hi guys i need some help in my pv550 hmi catlog number is 2711P-T6C20D series c. so i want connect slc 500 plc to pv550 . i want communication cable detail,in ethernet port or serialport. -
Upgrade SLC 5/05 Firmware
pv550 replied to Ferroresonance's topic in Allen Bradley / Rockwell Automation
sir i want 1747 os302 series D ,but that .com series c os is available -
Upgrade SLC 5/05 Firmware
pv550 replied to Ferroresonance's topic in Allen Bradley / Rockwell Automation
thank for the information -
Upgrade SLC 5/05 Firmware
pv550 replied to Ferroresonance's topic in Allen Bradley / Rockwell Automation
hi i want upgrade firmware in myplc slc500 cpu model 1747-L532 ser D proc.rev 4.this is my cpu model .which firmware version is suitable the model. plse tell me any body how to download the firmware and which .com -
ALLEN BRADLEY SLC PROCESSOR 5/04 COMMUNICATION
pv550 replied to MIKE31's topic in Allen Bradley / Rockwell Automation
sir that cpu is two type of promblem occur first is steady fault led is on second the key switch is left side fixed,that means (run side) but the cpu is blinking in steady fault led on.so the cpu is not connected to pc.in rslinx autoconfigure is not sucessfull. plse tell some detail.how to slove the promblem.plse sir -
ALLEN BRADLEY SLC PROCESSOR 5/04 COMMUNICATION
pv550 replied to MIKE31's topic in Allen Bradley / Rockwell Automation
plse help me ,in my stand by plc slc 500 my slc 500 cpu model ; CAT:1747-L532 SER: E PROC,REV:8 key switch is fixed run postion and i try to turn rem mode and program mode .is not turn . -
sorry sir is here in matel panel of pv600 pluse so no letter are mention in the panel. and then the panel is empty. Is there micrologix 1100 .but i used my project so i thing common micrologix 1100 to pv600 pluse communication cable.
-
hi guys i want to some detail of siemens plc s7-200 cpu226 and cpu226xm difference . this the first question and then my second question is siemens plc cpu226 some type of program loaded this plc is not accepted for example: plc memory is too large size
-
ALLEN BRADLEY SLC PROCESSOR 5/04 COMMUNICATION
pv550 replied to MIKE31's topic in Allen Bradley / Rockwell Automation
thank u for the information -
ALLEN BRADLEY SLC PROCESSOR 5/04 COMMUNICATION
pv550 replied to MIKE31's topic in Allen Bradley / Rockwell Automation
first of all thank u for the information. yes i have a spare of plc rack chassis . and i chassis the plc rack then fault is not change -
in pv600 pluse hmi to micrologix 1100 communication cable pin detail.Any help