Jinx

MrPLC Member
 View profile  See their activity

  • Content count

    15

  • Joined

  • Last visited

Posts posted by Jinx

  1. Posted · Edited by Jinx

    Hi, Can anyone point me in the right direction to retrieve the manual for GX works2 help for FXCPU. I have tried to find it on mymitsubishi account under downloads for manuals but unsuccessful.

    Im trying to understand a section of a plc and going through help comes up with the following message

     

    Help.jpg

  3. Posted

    Hi,

    I have been given a task of upgrading our Printers onsite to different manufacturer. we have new model already onsite and i have looked at the logic of clearing the buffer but am unfamiliar with moving H(value) into registers.

    See example in attachment.

    Can someone explain what these H values mean

     

    PLC Rung.JPG

  8. Posted

    Hi, I have a program where the output stays on through a shift register sequence of m coils from m800 to m816 but they have programmed each m coil as an OR function holding the output on.

    I am in the middle of adding new OR functions to hold output on in seperate machine sequence but im having an error 'OVER THE EDIT RANGE'

    How do i create an input for example [=>m801 =<m8016] (stay on from m801 to m816)

    I am using Q series PLC

  9. Posted · Edited by Jinx

    Hi Rodney and whyme.

    I made my own rs232 - rs422 adaptor last night following the pin layout I found in the e -screens manual.

     

    When I connect my Cab5 cable PC end and use home made adaptor on HMI end, nothing happens on screen. doesn't boot up!

    I have also tried connecting the 5V supply to E-50 but it just keeps looking for the FX PLC that it connects to when connected to machine.

    Adaptor.JPG

    Home made adaptor.JPG

    CAB5.JPG

  10. Posted

    On ‎14‎/‎02‎/‎2011 at 3:30 PM, Inntele said:

    Is impossible to use CAB6 for E50 connection, and it's written in secton 2.3 of MA00522D Beijer manual. So there are two way: 1. To use RS232 connection via CAB5 & 232-25-ADP (this is special adapter for E50 the part of E50 supply). 2. To solder own special RS232 cable with DB9F-DB25F connectors between PC-COM and E50 (see E50 pinout on attached figure).

    Can someone send me an image of the e50 pinout arrangement to create my own Rs232 cable to E50 screen.

    Or advise me where I can purchase a 232-25-ADP.

    I only require to do a small Modification on a HMI already in use