[CQM1]

 I've a backup soft copy of the Omron C series PLC programme data, now if I'll like to convert it to mitsubishi FX series, is there any easy method to convert this?

[CQM1]

Thanks Innoaloe one thing more plz, how can I alter DM6600 values to change PC setup 

[CQM1]

Jay Sir in monitor mode do PLC gives outputs? 

[CQM1]

Yes Mr Innoaloe I used physical inputs bcoz I want to replace ordinary panel with HMI. In Mitsubishi PLCs I have done this practice, there it worked well. 

[CQM1]

Actually my HMI exp 40 tte communicating well with CQM1. All outputs are showing on HMI but when I touches any push botton on HMI, PLC makes no response on it. I may say that HMI reads well but unable to write any thing to PLC   I show RS232 Cable pinout which I made

 

[CQM1]

I attached lsis HMI with CQM1. communication done all outputs are showing on HMI but  physical input can't b putted. What's the reason plz help me out. I made rs232 Cable as following 2-2,3-3,5-9. Shorted socket pins 4 6, plug pins 4 5.  Is it necessary to short socket pins 7 8 and to link FG?

[CQM1]

I attached lsis HMI with CQM1. communication done all outputs are showing on plc but  physical input can't b putted. What's the reason plz help me out