Josemarian
MrPLC Member-
Content count
4 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Calendar
Everything posted by Josemarian
-
MicroLogix 1100 and In-Sight Cognex DM300 series commumication
Josemarian posted a topic in Allen Bradley / Rockwell Automation
Hi All, Am trying to communicate and make In-Sight bar code reader to trigger through MicroLogix 1100 with RSLogix 500. Does any have any info as to the steps to follow. Most of the info I saw and have tried were for SLC processor In fact, I created the String file ST10:0 for the target device as was mentioned in one of the posts but when I complied it there was error saying that St10:0 was not supported by the module. Please see attached file. Any insight will be appreciated-
- micrologix 1100
- in-sight
-
(and 1 more)
Tagged with:
-
Connecting Generic I/O module to Micrologix 1100
Josemarian posted a topic in Allen Bradley / Rockwell Automation
Hello All, Am a bit new to practical PLC applications. I was trying to configure a Phoenix Contact I/O module (1452916) on a MicroLogix 1100 PLC but it kept faulting out with the fault light RED. It would say "Major Error Halt S:1/13". The error description says I/O mismatch. The error code is 187h (see attachment). The Phoenix module has a cable with 19 pin positions for the 8 input. I connected the pin 17 and 18 to 24 volts and 0 volts respectively. Then because I was using input 5 I connected the pink wire to PLC input (I/1) 24volts and the White/Yellow wire to the PLC common. On the I/O configuration on RSLogix 500, I used "Other" ( See attachment) but did not know the vendor details. Could anyone help me with the steps on how to communicate with the module? I have also attached the PLC program I was running. Thanks- 3 replies
-
- connection
- configuration
-
(and 1 more)
Tagged with:
-
Connecting Generic I/O module to Micrologix 1100
Josemarian replied to Josemarian's topic in Allen Bradley / Rockwell Automation
Thank you guys for the information. Joe E, I will try out the connection you suggested and I will get back to you. Thanks -
Hi All, Am new to PLC design. I have made a couple of designs using RSLogix Pro simulator. Currently, am searching for a cheap means to implement my designs to be sure it works in the real world Can anyone suggest components that can be utilized. My budget is about $100. Thanks