[How can i create drop down menu in citect scada]

hi everyone

how can i create a menu like a pic that i attached to this topic?. in other word in citect scada  in run time mode i want to by clicking on the button a menu just like a pic i attached to this topic is appeared. anyone can help me how should i do?

which cicode functions  i should use for it?

can anyone has a example code for this?

[problem about connecting to NI OPC Server]

hi dears in one of my project i need to connect to NIOPC to browse some tags. my opc client is citect scada and opc server is NI OPC. i should add this pint that both of opc client and opc server are in same PC. the strange problem is that i can connect citect scada TO kepware opc server but about niopc i cannot. what is my mistake?

[Problem About using from Event Task in Advantech Apax5520-KW]

hi dears i use from advantech apax-5520KW plc and i use from Multiprog software for programming it. i need to use from interrupt in my program. because of this i defined event task. but unfortunately i donot know how can i enable event.of course there is a function block that called event_task but unfortunately it does not work in apax-5520kw! so how can i enable events in this PLC?

[view a citect scada project on a stadard web browser]

thanks for your answer i have done necessary configuration both for server and client side.but when i open an internet explorer in client PC and type Http://<server ip address>/Citect i see error like attached file below.i don't know what should i do exactly and i don't understand the meaning of these message.can you help me?

[view a citect scada project on a stadard web browser]

hi dears i have a citect scada project on the my computer and i want to view it in a different computer by a standard web browser such as mozilla firefox. what should i do exactly?

[problem about express I/O Device setup in Citect Scada]

hi I have a strange problem! i use from citect scada v7.01.my os is win7 professional.i defined a new project in citect scada and when i wanted to run express i/o Device setup, unfortunatelly it does not run! and my cpu usage increases rapidly! where is the problem?

[problem about connecting Labview to Delta PLC]

hi dears i connected labview to Delta PLC with DCS Module. and i created I/O server with Modbus TCP Protocol. when i just define a Axlilury Tag, everything is ok and i can read and write on it. but problem is start when i define another variable tag. for example when i define a variable tag for output coil, and click on run button, i face whit this message:Error-1967353902 occurred at Shared Variable in X Vi.vi where is the Problem?

[question about "TrnsetDisplayMode" in Citect scada]

Hi Dears i want to fill gaps between Trend's Graph. i referd to Citect Help And I tried Some Trend Parameters such as: [Trend]Gapfillmode,[Trend]GapFillsamples and [Trend]GapfillTime. but unfortunately none of them did not work. ofcurse Citect recommend to use of TrnSetdisplayMode() function for filling gap in trend Graph but Unfortunately i couldnot use it. can anyone help me?

[problm about reading Delta Sv Output tag by Citect Scada]

hi i have connected Delta 28SV11T to Citect Scada through Ethernet and i can read Input register tag such as X0 or X20 and i can read the quantity of D regiters. but ubfortunately i can't read the output register tag such as Y0 or Y1. can anyone help me?

[connecting citect scada to Labview]

unfortunately i dont have understand your advices. could you please explain a bit more?

[connecting citect scada to Labview]

how can do this by OPC?

[connecting citect scada to Labview]

hi dears there is a project that has been worked by Labview and now, i want to transfer my scada to citect. how can i connect to labview through Citect scada and Read tags?

[oldham mx52 control system]

hi dears i have an oldham F&G control system model MX52. this panel supply RS485 protocol and i want to display its register quantities by citect scada.but unfortunately i can't find the modbus map document.could you please help me?

[problem about reading registers in float format]

i changed my ordering bits by float mode,but when i have another problem, i want to display quantity of 4 registers,so i defined 4 real tag, but every time i changed float mode only one of them shows correct quantity,for instant when i set float mode to 0 register 1 shows correct quantity but the other register show incorrect quantity,or when i set float mode to 1 only register 2 shows correct quantity and another registers show incorrect quantity. have should i do?

[problem about reading registers in float format]

unfortunately my control system does not have this facility that i can convert float number to integer,so i have to do this work by citect scada. of course at first i define variable tag as real type, but again i see unsuitable quantity related to my register.

[problem about reading registers in float format]

hi dears i am working on the device and i want to read its registers by citect scada,but the type of registers is float and when i want to read it,the quantities Are so meaningless!how can i convert this quantities to integer format?of course by citect scada.

[Problem about assigning tag to Process analyst in off-time mode]

hi dears how can i assign tag to process analyst in citect scada in off time mode? of course i know how can i assign tag to process analyst in run time mode but i want to assign tag to it before entering run time mode.is it possible?

[question about *.hst files in process analyst in citect scada]

of course in my configuration i set number of files 10 and period "Saturday",is it mean i can just see my trend files until 10 weeks ago?

[question about *.hst files in process analyst in citect scada]

hi dears how can i use from *.hst files in future?

[question about process analyst in citect scada]

another question: how can i use from *.hst files in future? my configuration is illustrated below:

[question about process analyst in citect scada]

can you explain your configuration a bit more please?

[question about process analyst in citect scada]

can you explain your configuration a bit more please?

[question about process analyst in citect scada]

hi dears how can i increase my number of sample in process analyst?unfortunately i can not increase number of my sample above 3000.

[Problem about Tremds]

hi dears i have some problems about trends.for example suppose i have a variable tag and i wanna to show it by trends every 1 second.i put these setting but unfortunately i can not enter run time mode and face with a message error.

[elipse scada DATA BASE MANAGEMENT]

you do not have a special problem with free software except that you can use from run time mode only 20 minutes. for using ellipse you should double click on the ellipse and choose one of the options from fill tab.then you should assign your tag to your ellipse.for more information get help from citect help.you can download it from internet so easily.