farhan yousuf

MrPLC Member
 View profile  See their activity

  • Content count

    15

  • Joined

  • Last visited

Posts posted by farhan yousuf

  1. Posted

    hi all,

    i am using two Mitsubishi Servo Driver MRJ2S-200A 2kw 3-Phase, 220v, Mitsubishi Servo Drive MRJ2S-350-A 3.5kw 3-Phase, 220v with compatible servo motors i want to sync these two motors.

    anyone know how that which parameter use to sync.

    thanks,

    regards,

    farhan

  2. Posted

    hi all, i am new on omron,can some please help me i have a CJ1M cpu12 plc i want to upload the data from plc but i have not programming cable and procedure during the uploading follows. i need a programming cable. thanks. best regards, farhan

  8. Posted

    i am facing a problem to upload the data from hmi. i have a Schneider XBTGT5230 HMI and making a connection through Ethernet. first of all i made a dummy programme by using vijeo designer software and connect to my laptop by using Ethernet connection my programme was successfully downloaded but when i upload the programme through hmi by using data manager through this retrieve the data but i got a message "Target cannot specified". One more thing i have also upload the data from vijeo designer software through the Upload Editor Project but i got a message that was "upload editor project fail". i am not using CF card i just want to upload the data through internal memory of hmi. i have followed all procedure but i failed to upload the data please help me as soon as possible. thanks, regards, farhan

  9. Posted

    hi, i am facing a problem to uploading the data from hmi. i am making a ethernet connection between the pc & HMI. but when i upload the data from hmi i got a message that CF CARD IS NOT INSTALLED. actually the data is in the internal memory of hmi and i want to get the data from internal memory of hmi. please give me the suggestion that how can i upload the data from hmi without using the cf card just have a ethernet connection between pc & hmi. reply me as soon as possible thanks. regards, farhan

  11. Posted

    hi, i am facing a problem to uploading the data from hmi. i am making a ethernet connection between the pc & HMI. but when i upload the data from hmi i got a message that CF CARD IS NOT INSTALLED. actually the data is in the internal memory of hmi and i want to get the data from internal memory of hmi. please give me the suggestion that how can i upload the data from hmi without using the cf card just have a ethernet connection between pc & hmi. reply me as soon as possible thanks. regards, farhan

  13. Posted

    hi all, i am making a programme of tensile machine basically we put the fabric between the jaws and start the process then the load cell measure the load as the fabric cut then i want to hold the peak value when fabric cut i m suing a load amplifier which gives a 4 to 20 mA signal according to load anyone help me please how to hold the peak value when the fabric cut. thanks.......