[[Template core/front/global/updateWarning is throwing an error. This theme may be out of date. Run the support tool in the AdminCP to restore the default theme.]]
thanks for replying. as you know there are just 2 red leds: the batt.V and the cpu-e. As i am writing this, i am not 100% sure if both the led where on. after disconnecting the cable and taking off/on the supply. the leds are off again
Hello guys I was verry happy with my (borrowed) red SC-09 cable(D9-D25 red beijer). I connected it to the PLC (FX-80MR-DS) and was able to douwnload en load. Then i went away for dinner en when i came back: 2 red leds on the plc and a communication error on the PC. The D25 connector was a little warm. Can't get any communication anymore. Is this a known problem? What can i do to avoid it? I did not connect the little grounding cable which comes out of the D25. Is this critical and what is the best place to connect it? hope someone can help me!