Lubomir Pavlansky
MrPLC Member-
Content count
3 -
Joined
-
Last visited
Posts posted by Lubomir Pavlansky
-
-
Hi Sparky, I did it by this way also before, but it doesn´t work. But I tried your way also with Toolbus connection and it was working. No problem to connect to whole line. But with ethernet connection it doesnt work. I received also reply from myomron.com, that problem should be with routing table. I need to do some routing table and there define all routes. Maybe later I will try also this way. Thank you for your help. It was good advice for me. BR,Lubo -
Hi all, In company where I work we use Omron plc on all equipments. All these plc are connected each other and master plc via Controler Link Unit CLK-23. This is our production equipments network. Some PLC has also ethernet card. Via this card I´m able to connect to PLC. Now,a little expample to explain my problem: I´m connected to PLC1 via ethernet. PLC1 is connected to PLC2 via CLK-23. And question is : how can I connect to PLC2? But via PLC1. All this I asked because of I want to use CX Server DDE manager to collect data from line to excel table. With direct connection no problem. But I need to do real time connection with all plc on the line. Thank you for your help. BR, Lubomir
how to connect from PC to PLC2 via PLC1
in CX-Programmer
Posted