[[Template core/front/global/updateWarning is throwing an error. This theme may be out of date. Run the support tool in the AdminCP to restore the default theme.]]
Hey folks I'm trying to make a Ladder program in Sysmac Studio to control a Crane.
The crane gets via a HMI a position that it must drive to, first at high speed then in low speed this is controlled via encoder signal for fine positioning there are several sensors.
For all this I have an NX1P2-9B24DT1, NX-EC0222 and 3G3MX2-A4030-E
Someone here who can help me with an example of how this can be done in Ladder.
Crane Positioning
in NJ Series / Sysmac Studio
Posted
Hey folks
I'm trying to make a Ladder program in Sysmac Studio to control a Crane.
The crane gets via a HMI a position that it must drive to, first at high speed then in low speed this is controlled via encoder signal for fine positioning there are several sensors.
For all this I have an NX1P2-9B24DT1, NX-EC0222 and 3G3MX2-A4030-E
Someone here who can help me with an example of how this can be done in Ladder.
Many thanks in advance for your help.